ERGELIT-Fix 35
ERGELIT-Fix 35
Grouting mortar
Art. Nr.: HTD-21000
Early-strength WW mortar for the renovation of manhole frames & kerbstones or grouting machine anchors, foundations, posts, pipe penetrations and much more.
Further properties
ERGELIT-Fix 35 is the ideal cement-based grout for standard applications, offering high early strength and a maximum grain size of 4 mm. This unique mortar is enhanced with both organic and inorganic additives to ensure superior performance.
As a high-early-strength, single-component grout, ERGELIT-Fix 35 was specifically developed for grouting gaps in raised manhole covers of all types and designs. Furthermore, it is perfectly suited for grouting machine foundations, posts, bridge railings, slabs, pipe penetrations, turbines, precast concrete elements, rail chairs, and rolling mill equipment, as well as for the repair of curbs, steps, and small concrete floor areas.
Combining the robust properties of a certified WW mortar (sewage water resistant) with early strength and a consistency ranging from highly flowable to plastic, this mortar is the premier base product in the field of grouting. You can rely on ERGELIT-Fix 35 to withstand heavy loads and deliver dependable, long-term performance.
- Early high-strength, shrink-free
- Quellen > 0,1 Volumen %
- Resistant to frost and de-icing salt
- Flowability > 65 cm
- Acid and alkali resistant between pH 6-10
- Chloride-free, oil-resistant
- High resistance to dynamic stress
- Impermeable to water
- Good adhesive strength
- Largest grain size: 4 mm
Special features
- Early strength and with all the advantages of a high-quality mortar - in grain sizes up to 4 mm
- Achieves a compressive strength of approx. 5 N/mm² N/mm2 after approx. 2 hours
- ERGELIT-Fix 35, frost- and de-icing salt-resistant
- Acid and alkali resistant between pH 6-10
- ERGELIT-Fix 35 – watertight.
Application
- Consistency: highly flowable, can also be applied plastically with a working time of approx. 15-30 minutes
- Particularly recommended when strong crack resistance and edge protection are required
- For grouting gaps in raised manhole covers of all types and designs with a height of > 10 mm.
- Casting of machine anchors, machine foundations
- Casting of posts, bridge railings, slabs
- Pouring in pipe penetrations
- For renovating kerbs, steps and small concrete floor surfaces
- For casting turbines, precast concrete parts, rail chairs, rolling mills
